rhubarb-lip-sync/rhubarb/lib/googletest/docs/advanced.md

2319 lines
82 KiB
Markdown

# Advanced googletest Topics
## Introduction
Now that you have read the [googletest Primer](primer.md) and learned how to
write tests using googletest, it's time to learn some new tricks. This document
will show you more assertions as well as how to construct complex failure
messages, propagate fatal failures, reuse and speed up your test fixtures, and
use various flags with your tests.
## More Assertions
This section covers some less frequently used, but still significant,
assertions.
### Explicit Success and Failure
See [Explicit Success and Failure](reference/assertions.md#success-failure) in
the Assertions Reference.
### Exception Assertions
See [Exception Assertions](reference/assertions.md#exceptions) in the Assertions
Reference.
### Predicate Assertions for Better Error Messages
Even though googletest has a rich set of assertions, they can never be complete,
as it's impossible (nor a good idea) to anticipate all scenarios a user might
run into. Therefore, sometimes a user has to use `EXPECT_TRUE()` to check a
complex expression, for lack of a better macro. This has the problem of not
showing you the values of the parts of the expression, making it hard to
understand what went wrong. As a workaround, some users choose to construct the
failure message by themselves, streaming it into `EXPECT_TRUE()`. However, this
is awkward especially when the expression has side-effects or is expensive to
evaluate.
googletest gives you three different options to solve this problem:
#### Using an Existing Boolean Function
If you already have a function or functor that returns `bool` (or a type that
can be implicitly converted to `bool`), you can use it in a *predicate
assertion* to get the function arguments printed for free. See
[`EXPECT_PRED*`](reference/assertions.md#EXPECT_PRED) in the Assertions
Reference for details.
#### Using a Function That Returns an AssertionResult
While `EXPECT_PRED*()` and friends are handy for a quick job, the syntax is not
satisfactory: you have to use different macros for different arities, and it
feels more like Lisp than C++. The `::testing::AssertionResult` class solves
this problem.
An `AssertionResult` object represents the result of an assertion (whether it's
a success or a failure, and an associated message). You can create an
`AssertionResult` using one of these factory functions:
```c++
namespace testing {
// Returns an AssertionResult object to indicate that an assertion has
// succeeded.
AssertionResult AssertionSuccess();
// Returns an AssertionResult object to indicate that an assertion has
// failed.
AssertionResult AssertionFailure();
}
```
You can then use the `<<` operator to stream messages to the `AssertionResult`
object.
To provide more readable messages in Boolean assertions (e.g. `EXPECT_TRUE()`),
write a predicate function that returns `AssertionResult` instead of `bool`. For
example, if you define `IsEven()` as:
```c++
testing::AssertionResult IsEven(int n) {
if ((n % 2) == 0)
return testing::AssertionSuccess();
else
return testing::AssertionFailure() << n << " is odd";
}
```
instead of:
```c++
bool IsEven(int n) {
return (n % 2) == 0;
}
```
the failed assertion `EXPECT_TRUE(IsEven(Fib(4)))` will print:
```none
Value of: IsEven(Fib(4))
Actual: false (3 is odd)
Expected: true
```
instead of a more opaque
```none
Value of: IsEven(Fib(4))
Actual: false
Expected: true
```
If you want informative messages in `EXPECT_FALSE` and `ASSERT_FALSE` as well
(one third of Boolean assertions in the Google code base are negative ones), and
are fine with making the predicate slower in the success case, you can supply a
success message:
```c++
testing::AssertionResult IsEven(int n) {
if ((n % 2) == 0)
return testing::AssertionSuccess() << n << " is even";
else
return testing::AssertionFailure() << n << " is odd";
}
```
Then the statement `EXPECT_FALSE(IsEven(Fib(6)))` will print
```none
Value of: IsEven(Fib(6))
Actual: true (8 is even)
Expected: false
```
#### Using a Predicate-Formatter
If you find the default message generated by
[`EXPECT_PRED*`](reference/assertions.md#EXPECT_PRED) and
[`EXPECT_TRUE`](reference/assertions.md#EXPECT_TRUE) unsatisfactory, or some
arguments to your predicate do not support streaming to `ostream`, you can
instead use *predicate-formatter assertions* to *fully* customize how the
message is formatted. See
[`EXPECT_PRED_FORMAT*`](reference/assertions.md#EXPECT_PRED_FORMAT) in the
Assertions Reference for details.
### Floating-Point Comparison
See [Floating-Point Comparison](reference/assertions.md#floating-point) in the
Assertions Reference.
#### Floating-Point Predicate-Format Functions
Some floating-point operations are useful, but not that often used. In order to
avoid an explosion of new macros, we provide them as predicate-format functions
that can be used in the predicate assertion macro
[`EXPECT_PRED_FORMAT2`](reference/assertions.md#EXPECT_PRED_FORMAT), for
example:
```c++
EXPECT_PRED_FORMAT2(testing::FloatLE, val1, val2);
EXPECT_PRED_FORMAT2(testing::DoubleLE, val1, val2);
```
The above code verifies that `val1` is less than, or approximately equal to,
`val2`.
### Asserting Using gMock Matchers
See [`EXPECT_THAT`](reference/assertions.md#EXPECT_THAT) in the Assertions
Reference.
### More String Assertions
(Please read the [previous](#asserting-using-gmock-matchers) section first if
you haven't.)
You can use the gMock [string matchers](reference/matchers.md#string-matchers)
with [`EXPECT_THAT`](reference/assertions.md#EXPECT_THAT) to do more string
comparison tricks (sub-string, prefix, suffix, regular expression, and etc). For
example,
```c++
using ::testing::HasSubstr;
using ::testing::MatchesRegex;
...
ASSERT_THAT(foo_string, HasSubstr("needle"));
EXPECT_THAT(bar_string, MatchesRegex("\\w*\\d+"));
```
### Windows HRESULT assertions
See [Windows HRESULT Assertions](reference/assertions.md#HRESULT) in the
Assertions Reference.
### Type Assertions
You can call the function
```c++
::testing::StaticAssertTypeEq<T1, T2>();
```
to assert that types `T1` and `T2` are the same. The function does nothing if
the assertion is satisfied. If the types are different, the function call will
fail to compile, the compiler error message will say that
`T1 and T2 are not the same type` and most likely (depending on the compiler)
show you the actual values of `T1` and `T2`. This is mainly useful inside
template code.
**Caveat**: When used inside a member function of a class template or a function
template, `StaticAssertTypeEq<T1, T2>()` is effective only if the function is
instantiated. For example, given:
```c++
template <typename T> class Foo {
public:
void Bar() { testing::StaticAssertTypeEq<int, T>(); }
};
```
the code:
```c++
void Test1() { Foo<bool> foo; }
```
will not generate a compiler error, as `Foo<bool>::Bar()` is never actually
instantiated. Instead, you need:
```c++
void Test2() { Foo<bool> foo; foo.Bar(); }
```
to cause a compiler error.
### Assertion Placement
You can use assertions in any C++ function. In particular, it doesn't have to be
a method of the test fixture class. The one constraint is that assertions that
generate a fatal failure (`FAIL*` and `ASSERT_*`) can only be used in
void-returning functions. This is a consequence of Google's not using
exceptions. By placing it in a non-void function you'll get a confusing compile
error like `"error: void value not ignored as it ought to be"` or `"cannot
initialize return object of type 'bool' with an rvalue of type 'void'"` or
`"error: no viable conversion from 'void' to 'string'"`.
If you need to use fatal assertions in a function that returns non-void, one
option is to make the function return the value in an out parameter instead. For
example, you can rewrite `T2 Foo(T1 x)` to `void Foo(T1 x, T2* result)`. You
need to make sure that `*result` contains some sensible value even when the
function returns prematurely. As the function now returns `void`, you can use
any assertion inside of it.
If changing the function's type is not an option, you should just use assertions
that generate non-fatal failures, such as `ADD_FAILURE*` and `EXPECT_*`.
{: .callout .note}
NOTE: Constructors and destructors are not considered void-returning functions,
according to the C++ language specification, and so you may not use fatal
assertions in them; you'll get a compilation error if you try. Instead, either
call `abort` and crash the entire test executable, or put the fatal assertion in
a `SetUp`/`TearDown` function; see
[constructor/destructor vs. `SetUp`/`TearDown`](faq.md#CtorVsSetUp)
{: .callout .warning}
WARNING: A fatal assertion in a helper function (private void-returning method)
called from a constructor or destructor does not terminate the current test, as
your intuition might suggest: it merely returns from the constructor or
destructor early, possibly leaving your object in a partially-constructed or
partially-destructed state! You almost certainly want to `abort` or use
`SetUp`/`TearDown` instead.
## Skipping test execution
Related to the assertions `SUCCEED()` and `FAIL()`, you can prevent further test
execution at runtime with the `GTEST_SKIP()` macro. This is useful when you need
to check for preconditions of the system under test during runtime and skip
tests in a meaningful way.
`GTEST_SKIP()` can be used in individual test cases or in the `SetUp()` methods
of classes derived from either `::testing::Environment` or `::testing::Test`.
For example:
```c++
TEST(SkipTest, DoesSkip) {
GTEST_SKIP() << "Skipping single test";
EXPECT_EQ(0, 1); // Won't fail; it won't be executed
}
class SkipFixture : public ::testing::Test {
protected:
void SetUp() override {
GTEST_SKIP() << "Skipping all tests for this fixture";
}
};
// Tests for SkipFixture won't be executed.
TEST_F(SkipFixture, SkipsOneTest) {
EXPECT_EQ(5, 7); // Won't fail
}
```
As with assertion macros, you can stream a custom message into `GTEST_SKIP()`.
## Teaching googletest How to Print Your Values
When a test assertion such as `EXPECT_EQ` fails, googletest prints the argument
values to help you debug. It does this using a user-extensible value printer.
This printer knows how to print built-in C++ types, native arrays, STL
containers, and any type that supports the `<<` operator. For other types, it
prints the raw bytes in the value and hopes that you the user can figure it out.
As mentioned earlier, the printer is *extensible*. That means you can teach it
to do a better job at printing your particular type than to dump the bytes. To
do that, define `<<` for your type:
```c++
#include <ostream>
namespace foo {
class Bar { // We want googletest to be able to print instances of this.
...
// Create a free inline friend function.
friend std::ostream& operator<<(std::ostream& os, const Bar& bar) {
return os << bar.DebugString(); // whatever needed to print bar to os
}
};
// If you can't declare the function in the class it's important that the
// << operator is defined in the SAME namespace that defines Bar. C++'s look-up
// rules rely on that.
std::ostream& operator<<(std::ostream& os, const Bar& bar) {
return os << bar.DebugString(); // whatever needed to print bar to os
}
} // namespace foo
```
Sometimes, this might not be an option: your team may consider it bad style to
have a `<<` operator for `Bar`, or `Bar` may already have a `<<` operator that
doesn't do what you want (and you cannot change it). If so, you can instead
define a `PrintTo()` function like this:
```c++
#include <ostream>
namespace foo {
class Bar {
...
friend void PrintTo(const Bar& bar, std::ostream* os) {
*os << bar.DebugString(); // whatever needed to print bar to os
}
};
// If you can't declare the function in the class it's important that PrintTo()
// is defined in the SAME namespace that defines Bar. C++'s look-up rules rely
// on that.
void PrintTo(const Bar& bar, std::ostream* os) {
*os << bar.DebugString(); // whatever needed to print bar to os
}
} // namespace foo
```
If you have defined both `<<` and `PrintTo()`, the latter will be used when
googletest is concerned. This allows you to customize how the value appears in
googletest's output without affecting code that relies on the behavior of its
`<<` operator.
If you want to print a value `x` using googletest's value printer yourself, just
call `::testing::PrintToString(x)`, which returns an `std::string`:
```c++
vector<pair<Bar, int> > bar_ints = GetBarIntVector();
EXPECT_TRUE(IsCorrectBarIntVector(bar_ints))
<< "bar_ints = " << testing::PrintToString(bar_ints);
```
## Death Tests
In many applications, there are assertions that can cause application failure if
a condition is not met. These sanity checks, which ensure that the program is in
a known good state, are there to fail at the earliest possible time after some
program state is corrupted. If the assertion checks the wrong condition, then
the program may proceed in an erroneous state, which could lead to memory
corruption, security holes, or worse. Hence it is vitally important to test that
such assertion statements work as expected.
Since these precondition checks cause the processes to die, we call such tests
_death tests_. More generally, any test that checks that a program terminates
(except by throwing an exception) in an expected fashion is also a death test.
Note that if a piece of code throws an exception, we don't consider it "death"
for the purpose of death tests, as the caller of the code could catch the
exception and avoid the crash. If you want to verify exceptions thrown by your
code, see [Exception Assertions](#ExceptionAssertions).
If you want to test `EXPECT_*()/ASSERT_*()` failures in your test code, see
["Catching" Failures](#catching-failures).
### How to Write a Death Test
GoogleTest provides assertion macros to support death tests. See
[Death Assertions](reference/assertions.md#death) in the Assertions Reference
for details.
To write a death test, simply use one of the macros inside your test function.
For example,
```c++
TEST(MyDeathTest, Foo) {
// This death test uses a compound statement.
ASSERT_DEATH({
int n = 5;
Foo(&n);
}, "Error on line .* of Foo()");
}
TEST(MyDeathTest, NormalExit) {
EXPECT_EXIT(NormalExit(), testing::ExitedWithCode(0), "Success");
}
TEST(MyDeathTest, KillProcess) {
EXPECT_EXIT(KillProcess(), testing::KilledBySignal(SIGKILL),
"Sending myself unblockable signal");
}
```
verifies that:
* calling `Foo(5)` causes the process to die with the given error message,
* calling `NormalExit()` causes the process to print `"Success"` to stderr and
exit with exit code 0, and
* calling `KillProcess()` kills the process with signal `SIGKILL`.
The test function body may contain other assertions and statements as well, if
necessary.
Note that a death test only cares about three things:
1. does `statement` abort or exit the process?
2. (in the case of `ASSERT_EXIT` and `EXPECT_EXIT`) does the exit status
satisfy `predicate`? Or (in the case of `ASSERT_DEATH` and `EXPECT_DEATH`)
is the exit status non-zero? And
3. does the stderr output match `matcher`?
In particular, if `statement` generates an `ASSERT_*` or `EXPECT_*` failure, it
will **not** cause the death test to fail, as googletest assertions don't abort
the process.
### Death Test Naming
{: .callout .important}
IMPORTANT: We strongly recommend you to follow the convention of naming your
**test suite** (not test) `*DeathTest` when it contains a death test, as
demonstrated in the above example. The
[Death Tests And Threads](#death-tests-and-threads) section below explains why.
If a test fixture class is shared by normal tests and death tests, you can use
`using` or `typedef` to introduce an alias for the fixture class and avoid
duplicating its code:
```c++
class FooTest : public testing::Test { ... };
using FooDeathTest = FooTest;
TEST_F(FooTest, DoesThis) {
// normal test
}
TEST_F(FooDeathTest, DoesThat) {
// death test
}
```
### Regular Expression Syntax
On POSIX systems (e.g. Linux, Cygwin, and Mac), googletest uses the
[POSIX extended regular expression](http://www.opengroup.org/onlinepubs/009695399/basedefs/xbd_chap09.html#tag_09_04)
syntax. To learn about this syntax, you may want to read this
[Wikipedia entry](http://en.wikipedia.org/wiki/Regular_expression#POSIX_Extended_Regular_Expressions).
On Windows, googletest uses its own simple regular expression implementation. It
lacks many features. For example, we don't support union (`"x|y"`), grouping
(`"(xy)"`), brackets (`"[xy]"`), and repetition count (`"x{5,7}"`), among
others. Below is what we do support (`A` denotes a literal character, period
(`.`), or a single `\\ ` escape sequence; `x` and `y` denote regular
expressions.):
Expression | Meaning
---------- | --------------------------------------------------------------
`c` | matches any literal character `c`
`\\d` | matches any decimal digit
`\\D` | matches any character that's not a decimal digit
`\\f` | matches `\f`
`\\n` | matches `\n`
`\\r` | matches `\r`
`\\s` | matches any ASCII whitespace, including `\n`
`\\S` | matches any character that's not a whitespace
`\\t` | matches `\t`
`\\v` | matches `\v`
`\\w` | matches any letter, `_`, or decimal digit
`\\W` | matches any character that `\\w` doesn't match
`\\c` | matches any literal character `c`, which must be a punctuation
`.` | matches any single character except `\n`
`A?` | matches 0 or 1 occurrences of `A`
`A*` | matches 0 or many occurrences of `A`
`A+` | matches 1 or many occurrences of `A`
`^` | matches the beginning of a string (not that of each line)
`$` | matches the end of a string (not that of each line)
`xy` | matches `x` followed by `y`
To help you determine which capability is available on your system, googletest
defines macros to govern which regular expression it is using. The macros are:
`GTEST_USES_SIMPLE_RE=1` or `GTEST_USES_POSIX_RE=1`. If you want your death
tests to work in all cases, you can either `#if` on these macros or use the more
limited syntax only.
### How It Works
See [Death Assertions](reference/assertions.md#death) in the Assertions
Reference.
### Death Tests And Threads
The reason for the two death test styles has to do with thread safety. Due to
well-known problems with forking in the presence of threads, death tests should
be run in a single-threaded context. Sometimes, however, it isn't feasible to
arrange that kind of environment. For example, statically-initialized modules
may start threads before main is ever reached. Once threads have been created,
it may be difficult or impossible to clean them up.
googletest has three features intended to raise awareness of threading issues.
1. A warning is emitted if multiple threads are running when a death test is
encountered.
2. Test suites with a name ending in "DeathTest" are run before all other
tests.
3. It uses `clone()` instead of `fork()` to spawn the child process on Linux
(`clone()` is not available on Cygwin and Mac), as `fork()` is more likely
to cause the child to hang when the parent process has multiple threads.
It's perfectly fine to create threads inside a death test statement; they are
executed in a separate process and cannot affect the parent.
### Death Test Styles
The "threadsafe" death test style was introduced in order to help mitigate the
risks of testing in a possibly multithreaded environment. It trades increased
test execution time (potentially dramatically so) for improved thread safety.
The automated testing framework does not set the style flag. You can choose a
particular style of death tests by setting the flag programmatically:
```c++
testing::FLAGS_gtest_death_test_style="threadsafe"
```
You can do this in `main()` to set the style for all death tests in the binary,
or in individual tests. Recall that flags are saved before running each test and
restored afterwards, so you need not do that yourself. For example:
```c++
int main(int argc, char** argv) {
testing::InitGoogleTest(&argc, argv);
testing::FLAGS_gtest_death_test_style = "fast";
return RUN_ALL_TESTS();
}
TEST(MyDeathTest, TestOne) {
testing::FLAGS_gtest_death_test_style = "threadsafe";
// This test is run in the "threadsafe" style:
ASSERT_DEATH(ThisShouldDie(), "");
}
TEST(MyDeathTest, TestTwo) {
// This test is run in the "fast" style:
ASSERT_DEATH(ThisShouldDie(), "");
}
```
### Caveats
The `statement` argument of `ASSERT_EXIT()` can be any valid C++ statement. If
it leaves the current function via a `return` statement or by throwing an
exception, the death test is considered to have failed. Some googletest macros
may return from the current function (e.g. `ASSERT_TRUE()`), so be sure to avoid
them in `statement`.
Since `statement` runs in the child process, any in-memory side effect (e.g.
modifying a variable, releasing memory, etc) it causes will *not* be observable
in the parent process. In particular, if you release memory in a death test,
your program will fail the heap check as the parent process will never see the
memory reclaimed. To solve this problem, you can
1. try not to free memory in a death test;
2. free the memory again in the parent process; or
3. do not use the heap checker in your program.
Due to an implementation detail, you cannot place multiple death test assertions
on the same line; otherwise, compilation will fail with an unobvious error
message.
Despite the improved thread safety afforded by the "threadsafe" style of death
test, thread problems such as deadlock are still possible in the presence of
handlers registered with `pthread_atfork(3)`.
## Using Assertions in Sub-routines
{: .callout .note}
Note: If you want to put a series of test assertions in a subroutine to check
for a complex condition, consider using
[a custom GMock matcher](gmock_cook_book.md#NewMatchers)
instead. This lets you provide a more readable error message in case of failure
and avoid all of the issues described below.
### Adding Traces to Assertions
If a test sub-routine is called from several places, when an assertion inside it
fails, it can be hard to tell which invocation of the sub-routine the failure is
from. You can alleviate this problem using extra logging or custom failure
messages, but that usually clutters up your tests. A better solution is to use
the `SCOPED_TRACE` macro or the `ScopedTrace` utility:
```c++
SCOPED_TRACE(message);
```
```c++
ScopedTrace trace("file_path", line_number, message);
```
where `message` can be anything streamable to `std::ostream`. `SCOPED_TRACE`
macro will cause the current file name, line number, and the given message to be
added in every failure message. `ScopedTrace` accepts explicit file name and
line number in arguments, which is useful for writing test helpers. The effect
will be undone when the control leaves the current lexical scope.
For example,
```c++
10: void Sub1(int n) {
11: EXPECT_EQ(Bar(n), 1);
12: EXPECT_EQ(Bar(n + 1), 2);
13: }
14:
15: TEST(FooTest, Bar) {
16: {
17: SCOPED_TRACE("A"); // This trace point will be included in
18: // every failure in this scope.
19: Sub1(1);
20: }
21: // Now it won't.
22: Sub1(9);
23: }
```
could result in messages like these:
```none
path/to/foo_test.cc:11: Failure
Value of: Bar(n)
Expected: 1
Actual: 2
Google Test trace:
path/to/foo_test.cc:17: A
path/to/foo_test.cc:12: Failure
Value of: Bar(n + 1)
Expected: 2
Actual: 3
```
Without the trace, it would've been difficult to know which invocation of
`Sub1()` the two failures come from respectively. (You could add an extra
message to each assertion in `Sub1()` to indicate the value of `n`, but that's
tedious.)
Some tips on using `SCOPED_TRACE`:
1. With a suitable message, it's often enough to use `SCOPED_TRACE` at the
beginning of a sub-routine, instead of at each call site.
2. When calling sub-routines inside a loop, make the loop iterator part of the
message in `SCOPED_TRACE` such that you can know which iteration the failure
is from.
3. Sometimes the line number of the trace point is enough for identifying the
particular invocation of a sub-routine. In this case, you don't have to
choose a unique message for `SCOPED_TRACE`. You can simply use `""`.
4. You can use `SCOPED_TRACE` in an inner scope when there is one in the outer
scope. In this case, all active trace points will be included in the failure
messages, in reverse order they are encountered.
5. The trace dump is clickable in Emacs - hit `return` on a line number and
you'll be taken to that line in the source file!
### Propagating Fatal Failures
A common pitfall when using `ASSERT_*` and `FAIL*` is not understanding that
when they fail they only abort the _current function_, not the entire test. For
example, the following test will segfault:
```c++
void Subroutine() {
// Generates a fatal failure and aborts the current function.
ASSERT_EQ(1, 2);
// The following won't be executed.
...
}
TEST(FooTest, Bar) {
Subroutine(); // The intended behavior is for the fatal failure
// in Subroutine() to abort the entire test.
// The actual behavior: the function goes on after Subroutine() returns.
int* p = nullptr;
*p = 3; // Segfault!
}
```
To alleviate this, googletest provides three different solutions. You could use
either exceptions, the `(ASSERT|EXPECT)_NO_FATAL_FAILURE` assertions or the
`HasFatalFailure()` function. They are described in the following two
subsections.
#### Asserting on Subroutines with an exception
The following code can turn ASSERT-failure into an exception:
```c++
class ThrowListener : public testing::EmptyTestEventListener {
void OnTestPartResult(const testing::TestPartResult& result) override {
if (result.type() == testing::TestPartResult::kFatalFailure) {
throw testing::AssertionException(result);
}
}
};
int main(int argc, char** argv) {
...
testing::UnitTest::GetInstance()->listeners().Append(new ThrowListener);
return RUN_ALL_TESTS();
}
```
This listener should be added after other listeners if you have any, otherwise
they won't see failed `OnTestPartResult`.
#### Asserting on Subroutines
As shown above, if your test calls a subroutine that has an `ASSERT_*` failure
in it, the test will continue after the subroutine returns. This may not be what
you want.
Often people want fatal failures to propagate like exceptions. For that
googletest offers the following macros:
Fatal assertion | Nonfatal assertion | Verifies
------------------------------------- | ------------------------------------- | --------
`ASSERT_NO_FATAL_FAILURE(statement);` | `EXPECT_NO_FATAL_FAILURE(statement);` | `statement` doesn't generate any new fatal failures in the current thread.
Only failures in the thread that executes the assertion are checked to determine
the result of this type of assertions. If `statement` creates new threads,
failures in these threads are ignored.
Examples:
```c++
ASSERT_NO_FATAL_FAILURE(Foo());
int i;
EXPECT_NO_FATAL_FAILURE({
i = Bar();
});
```
Assertions from multiple threads are currently not supported on Windows.
#### Checking for Failures in the Current Test
`HasFatalFailure()` in the `::testing::Test` class returns `true` if an
assertion in the current test has suffered a fatal failure. This allows
functions to catch fatal failures in a sub-routine and return early.
```c++
class Test {
public:
...
static bool HasFatalFailure();
};
```
The typical usage, which basically simulates the behavior of a thrown exception,
is:
```c++
TEST(FooTest, Bar) {
Subroutine();
// Aborts if Subroutine() had a fatal failure.
if (HasFatalFailure()) return;
// The following won't be executed.
...
}
```
If `HasFatalFailure()` is used outside of `TEST()` , `TEST_F()` , or a test
fixture, you must add the `::testing::Test::` prefix, as in:
```c++
if (testing::Test::HasFatalFailure()) return;
```
Similarly, `HasNonfatalFailure()` returns `true` if the current test has at
least one non-fatal failure, and `HasFailure()` returns `true` if the current
test has at least one failure of either kind.
## Logging Additional Information
In your test code, you can call `RecordProperty("key", value)` to log additional
information, where `value` can be either a string or an `int`. The *last* value
recorded for a key will be emitted to the
[XML output](#generating-an-xml-report) if you specify one. For example, the
test
```c++
TEST_F(WidgetUsageTest, MinAndMaxWidgets) {
RecordProperty("MaximumWidgets", ComputeMaxUsage());
RecordProperty("MinimumWidgets", ComputeMinUsage());
}
```
will output XML like this:
```xml
...
<testcase name="MinAndMaxWidgets" status="run" time="0.006" classname="WidgetUsageTest" MaximumWidgets="12" MinimumWidgets="9" />
...
```
{: .callout .note}
> NOTE:
>
> * `RecordProperty()` is a static member of the `Test` class. Therefore it
> needs to be prefixed with `::testing::Test::` if used outside of the
> `TEST` body and the test fixture class.
> * *`key`* must be a valid XML attribute name, and cannot conflict with the
> ones already used by googletest (`name`, `status`, `time`, `classname`,
> `type_param`, and `value_param`).
> * Calling `RecordProperty()` outside of the lifespan of a test is allowed.
> If it's called outside of a test but between a test suite's
> `SetUpTestSuite()` and `TearDownTestSuite()` methods, it will be
> attributed to the XML element for the test suite. If it's called outside
> of all test suites (e.g. in a test environment), it will be attributed to
> the top-level XML element.
## Sharing Resources Between Tests in the Same Test Suite
googletest creates a new test fixture object for each test in order to make
tests independent and easier to debug. However, sometimes tests use resources
that are expensive to set up, making the one-copy-per-test model prohibitively
expensive.
If the tests don't change the resource, there's no harm in their sharing a
single resource copy. So, in addition to per-test set-up/tear-down, googletest
also supports per-test-suite set-up/tear-down. To use it:
1. In your test fixture class (say `FooTest` ), declare as `static` some member
variables to hold the shared resources.
2. Outside your test fixture class (typically just below it), define those
member variables, optionally giving them initial values.
3. In the same test fixture class, define a `static void SetUpTestSuite()`
function (remember not to spell it as **`SetupTestSuite`** with a small
`u`!) to set up the shared resources and a `static void TearDownTestSuite()`
function to tear them down.
That's it! googletest automatically calls `SetUpTestSuite()` before running the
*first test* in the `FooTest` test suite (i.e. before creating the first
`FooTest` object), and calls `TearDownTestSuite()` after running the *last test*
in it (i.e. after deleting the last `FooTest` object). In between, the tests can
use the shared resources.
Remember that the test order is undefined, so your code can't depend on a test
preceding or following another. Also, the tests must either not modify the state
of any shared resource, or, if they do modify the state, they must restore the
state to its original value before passing control to the next test.
Here's an example of per-test-suite set-up and tear-down:
```c++
class FooTest : public testing::Test {
protected:
// Per-test-suite set-up.
// Called before the first test in this test suite.
// Can be omitted if not needed.
static void SetUpTestSuite() {
shared_resource_ = new ...;
}
// Per-test-suite tear-down.
// Called after the last test in this test suite.
// Can be omitted if not needed.
static void TearDownTestSuite() {
delete shared_resource_;
shared_resource_ = nullptr;
}
// You can define per-test set-up logic as usual.
void SetUp() override { ... }
// You can define per-test tear-down logic as usual.
void TearDown() override { ... }
// Some expensive resource shared by all tests.
static T* shared_resource_;
};
T* FooTest::shared_resource_ = nullptr;
TEST_F(FooTest, Test1) {
... you can refer to shared_resource_ here ...
}
TEST_F(FooTest, Test2) {
... you can refer to shared_resource_ here ...
}
```
{: .callout .note}
NOTE: Though the above code declares `SetUpTestSuite()` protected, it may
sometimes be necessary to declare it public, such as when using it with
`TEST_P`.
## Global Set-Up and Tear-Down
Just as you can do set-up and tear-down at the test level and the test suite
level, you can also do it at the test program level. Here's how.
First, you subclass the `::testing::Environment` class to define a test
environment, which knows how to set-up and tear-down:
```c++
class Environment : public ::testing::Environment {
public:
~Environment() override {}
// Override this to define how to set up the environment.
void SetUp() override {}
// Override this to define how to tear down the environment.
void TearDown() override {}
};
```
Then, you register an instance of your environment class with googletest by
calling the `::testing::AddGlobalTestEnvironment()` function:
```c++
Environment* AddGlobalTestEnvironment(Environment* env);
```
Now, when `RUN_ALL_TESTS()` is called, it first calls the `SetUp()` method of
each environment object, then runs the tests if none of the environments
reported fatal failures and `GTEST_SKIP()` was not called. `RUN_ALL_TESTS()`
always calls `TearDown()` with each environment object, regardless of whether or
not the tests were run.
It's OK to register multiple environment objects. In this suite, their `SetUp()`
will be called in the order they are registered, and their `TearDown()` will be
called in the reverse order.
Note that googletest takes ownership of the registered environment objects.
Therefore **do not delete them** by yourself.
You should call `AddGlobalTestEnvironment()` before `RUN_ALL_TESTS()` is called,
probably in `main()`. If you use `gtest_main`, you need to call this before
`main()` starts for it to take effect. One way to do this is to define a global
variable like this:
```c++
testing::Environment* const foo_env =
testing::AddGlobalTestEnvironment(new FooEnvironment);
```
However, we strongly recommend you to write your own `main()` and call
`AddGlobalTestEnvironment()` there, as relying on initialization of global
variables makes the code harder to read and may cause problems when you register
multiple environments from different translation units and the environments have
dependencies among them (remember that the compiler doesn't guarantee the order
in which global variables from different translation units are initialized).
## Value-Parameterized Tests
*Value-parameterized tests* allow you to test your code with different
parameters without writing multiple copies of the same test. This is useful in a
number of situations, for example:
* You have a piece of code whose behavior is affected by one or more
command-line flags. You want to make sure your code performs correctly for
various values of those flags.
* You want to test different implementations of an OO interface.
* You want to test your code over various inputs (a.k.a. data-driven testing).
This feature is easy to abuse, so please exercise your good sense when doing
it!
### How to Write Value-Parameterized Tests
To write value-parameterized tests, first you should define a fixture class. It
must be derived from both `testing::Test` and `testing::WithParamInterface<T>`
(the latter is a pure interface), where `T` is the type of your parameter
values. For convenience, you can just derive the fixture class from
`testing::TestWithParam<T>`, which itself is derived from both `testing::Test`
and `testing::WithParamInterface<T>`. `T` can be any copyable type. If it's a
raw pointer, you are responsible for managing the lifespan of the pointed
values.
{: .callout .note}
NOTE: If your test fixture defines `SetUpTestSuite()` or `TearDownTestSuite()`
they must be declared **public** rather than **protected** in order to use
`TEST_P`.
```c++
class FooTest :
public testing::TestWithParam<const char*> {
// You can implement all the usual fixture class members here.
// To access the test parameter, call GetParam() from class
// TestWithParam<T>.
};
// Or, when you want to add parameters to a pre-existing fixture class:
class BaseTest : public testing::Test {
...
};
class BarTest : public BaseTest,
public testing::WithParamInterface<const char*> {
...
};
```
Then, use the `TEST_P` macro to define as many test patterns using this fixture
as you want. The `_P` suffix is for "parameterized" or "pattern", whichever you
prefer to think.
```c++
TEST_P(FooTest, DoesBlah) {
// Inside a test, access the test parameter with the GetParam() method
// of the TestWithParam<T> class:
EXPECT_TRUE(foo.Blah(GetParam()));
...
}
TEST_P(FooTest, HasBlahBlah) {
...
}
```
Finally, you can use the `INSTANTIATE_TEST_SUITE_P` macro to instantiate the
test suite with any set of parameters you want. GoogleTest defines a number of
functions for generating test parameters—see details at
[`INSTANTIATE_TEST_SUITE_P`](reference/testing.md#INSTANTIATE_TEST_SUITE_P) in
the Testing Reference.
For example, the following statement will instantiate tests from the `FooTest`
test suite each with parameter values `"meeny"`, `"miny"`, and `"moe"` using the
[`Values`](reference/testing.md#param-generators) parameter generator:
```c++
INSTANTIATE_TEST_SUITE_P(MeenyMinyMoe,
FooTest,
testing::Values("meeny", "miny", "moe"));
```
{: .callout .note}
NOTE: The code above must be placed at global or namespace scope, not at
function scope.
The first argument to `INSTANTIATE_TEST_SUITE_P` is a unique name for the
instantiation of the test suite. The next argument is the name of the test
pattern, and the last is the
[parameter generator](reference/testing.md#param-generators).
You can instantiate a test pattern more than once, so to distinguish different
instances of the pattern, the instantiation name is added as a prefix to the
actual test suite name. Remember to pick unique prefixes for different
instantiations. The tests from the instantiation above will have these names:
* `MeenyMinyMoe/FooTest.DoesBlah/0` for `"meeny"`
* `MeenyMinyMoe/FooTest.DoesBlah/1` for `"miny"`
* `MeenyMinyMoe/FooTest.DoesBlah/2` for `"moe"`
* `MeenyMinyMoe/FooTest.HasBlahBlah/0` for `"meeny"`
* `MeenyMinyMoe/FooTest.HasBlahBlah/1` for `"miny"`
* `MeenyMinyMoe/FooTest.HasBlahBlah/2` for `"moe"`
You can use these names in [`--gtest_filter`](#running-a-subset-of-the-tests).
The following statement will instantiate all tests from `FooTest` again, each
with parameter values `"cat"` and `"dog"` using the
[`ValuesIn`](reference/testing.md#param-generators) parameter generator:
```c++
const char* pets[] = {"cat", "dog"};
INSTANTIATE_TEST_SUITE_P(Pets, FooTest, testing::ValuesIn(pets));
```
The tests from the instantiation above will have these names:
* `Pets/FooTest.DoesBlah/0` for `"cat"`
* `Pets/FooTest.DoesBlah/1` for `"dog"`
* `Pets/FooTest.HasBlahBlah/0` for `"cat"`
* `Pets/FooTest.HasBlahBlah/1` for `"dog"`
Please note that `INSTANTIATE_TEST_SUITE_P` will instantiate *all* tests in the
given test suite, whether their definitions come before or *after* the
`INSTANTIATE_TEST_SUITE_P` statement.
Additionally, by default, every `TEST_P` without a corresponding
`INSTANTIATE_TEST_SUITE_P` causes a failing test in test suite
`GoogleTestVerification`. If you have a test suite where that omission is not an
error, for example it is in a library that may be linked in for other reasons or
where the list of test cases is dynamic and may be empty, then this check can be
suppressed by tagging the test suite:
```c++
GTEST_ALLOW_UNINSTANTIATED_PARAMETERIZED_TEST(FooTest);
```
You can see [sample7_unittest.cc] and [sample8_unittest.cc] for more examples.
[sample7_unittest.cc]: https://github.com/google/googletest/blob/master/googletest/samples/sample7_unittest.cc "Parameterized Test example"
[sample8_unittest.cc]: https://github.com/google/googletest/blob/master/googletest/samples/sample8_unittest.cc "Parameterized Test example with multiple parameters"
### Creating Value-Parameterized Abstract Tests
In the above, we define and instantiate `FooTest` in the *same* source file.
Sometimes you may want to define value-parameterized tests in a library and let
other people instantiate them later. This pattern is known as *abstract tests*.
As an example of its application, when you are designing an interface you can
write a standard suite of abstract tests (perhaps using a factory function as
the test parameter) that all implementations of the interface are expected to
pass. When someone implements the interface, they can instantiate your suite to
get all the interface-conformance tests for free.
To define abstract tests, you should organize your code like this:
1. Put the definition of the parameterized test fixture class (e.g. `FooTest`)
in a header file, say `foo_param_test.h`. Think of this as *declaring* your
abstract tests.
2. Put the `TEST_P` definitions in `foo_param_test.cc`, which includes
`foo_param_test.h`. Think of this as *implementing* your abstract tests.
Once they are defined, you can instantiate them by including `foo_param_test.h`,
invoking `INSTANTIATE_TEST_SUITE_P()`, and depending on the library target that
contains `foo_param_test.cc`. You can instantiate the same abstract test suite
multiple times, possibly in different source files.
### Specifying Names for Value-Parameterized Test Parameters
The optional last argument to `INSTANTIATE_TEST_SUITE_P()` allows the user to
specify a function or functor that generates custom test name suffixes based on
the test parameters. The function should accept one argument of type
`testing::TestParamInfo<class ParamType>`, and return `std::string`.
`testing::PrintToStringParamName` is a builtin test suffix generator that
returns the value of `testing::PrintToString(GetParam())`. It does not work for
`std::string` or C strings.
{: .callout .note}
NOTE: test names must be non-empty, unique, and may only contain ASCII
alphanumeric characters. In particular, they
[should not contain underscores](faq.md#why-should-test-suite-names-and-test-names-not-contain-underscore)
```c++
class MyTestSuite : public testing::TestWithParam<int> {};
TEST_P(MyTestSuite, MyTest)
{
std::cout << "Example Test Param: " << GetParam() << std::endl;
}
INSTANTIATE_TEST_SUITE_P(MyGroup, MyTestSuite, testing::Range(0, 10),
testing::PrintToStringParamName());
```
Providing a custom functor allows for more control over test parameter name
generation, especially for types where the automatic conversion does not
generate helpful parameter names (e.g. strings as demonstrated above). The
following example illustrates this for multiple parameters, an enumeration type
and a string, and also demonstrates how to combine generators. It uses a lambda
for conciseness:
```c++
enum class MyType { MY_FOO = 0, MY_BAR = 1 };
class MyTestSuite : public testing::TestWithParam<std::tuple<MyType, std::string>> {
};
INSTANTIATE_TEST_SUITE_P(
MyGroup, MyTestSuite,
testing::Combine(
testing::Values(MyType::MY_FOO, MyType::MY_BAR),
testing::Values("A", "B")),
[](const testing::TestParamInfo<MyTestSuite::ParamType>& info) {
std::string name = absl::StrCat(
std::get<0>(info.param) == MyType::MY_FOO ? "Foo" : "Bar",
std::get<1>(info.param));
absl::c_replace_if(name, [](char c) { return !std::isalnum(c); }, '_');
return name;
});
```
## Typed Tests
Suppose you have multiple implementations of the same interface and want to make
sure that all of them satisfy some common requirements. Or, you may have defined
several types that are supposed to conform to the same "concept" and you want to
verify it. In both cases, you want the same test logic repeated for different
types.
While you can write one `TEST` or `TEST_F` for each type you want to test (and
you may even factor the test logic into a function template that you invoke from
the `TEST`), it's tedious and doesn't scale: if you want `m` tests over `n`
types, you'll end up writing `m*n` `TEST`s.
*Typed tests* allow you to repeat the same test logic over a list of types. You
only need to write the test logic once, although you must know the type list
when writing typed tests. Here's how you do it:
First, define a fixture class template. It should be parameterized by a type.
Remember to derive it from `::testing::Test`:
```c++
template <typename T>
class FooTest : public testing::Test {
public:
...
using List = std::list<T>;
static T shared_;
T value_;
};
```
Next, associate a list of types with the test suite, which will be repeated for
each type in the list:
```c++
using MyTypes = ::testing::Types<char, int, unsigned int>;
TYPED_TEST_SUITE(FooTest, MyTypes);
```
The type alias (`using` or `typedef`) is necessary for the `TYPED_TEST_SUITE`
macro to parse correctly. Otherwise the compiler will think that each comma in
the type list introduces a new macro argument.
Then, use `TYPED_TEST()` instead of `TEST_F()` to define a typed test for this
test suite. You can repeat this as many times as you want:
```c++
TYPED_TEST(FooTest, DoesBlah) {
// Inside a test, refer to the special name TypeParam to get the type
// parameter. Since we are inside a derived class template, C++ requires
// us to visit the members of FooTest via 'this'.
TypeParam n = this->value_;
// To visit static members of the fixture, add the 'TestFixture::'
// prefix.
n += TestFixture::shared_;
// To refer to typedefs in the fixture, add the 'typename TestFixture::'
// prefix. The 'typename' is required to satisfy the compiler.
typename TestFixture::List values;
values.push_back(n);
...
}
TYPED_TEST(FooTest, HasPropertyA) { ... }
```
You can see [sample6_unittest.cc] for a complete example.
[sample6_unittest.cc]: https://github.com/google/googletest/blob/master/googletest/samples/sample6_unittest.cc "Typed Test example"
## Type-Parameterized Tests
*Type-parameterized tests* are like typed tests, except that they don't require
you to know the list of types ahead of time. Instead, you can define the test
logic first and instantiate it with different type lists later. You can even
instantiate it more than once in the same program.
If you are designing an interface or concept, you can define a suite of
type-parameterized tests to verify properties that any valid implementation of
the interface/concept should have. Then, the author of each implementation can
just instantiate the test suite with their type to verify that it conforms to
the requirements, without having to write similar tests repeatedly. Here's an
example:
First, define a fixture class template, as we did with typed tests:
```c++
template <typename T>
class FooTest : public testing::Test {
...
};
```
Next, declare that you will define a type-parameterized test suite:
```c++
TYPED_TEST_SUITE_P(FooTest);
```
Then, use `TYPED_TEST_P()` to define a type-parameterized test. You can repeat
this as many times as you want:
```c++
TYPED_TEST_P(FooTest, DoesBlah) {
// Inside a test, refer to TypeParam to get the type parameter.
TypeParam n = 0;
...
}
TYPED_TEST_P(FooTest, HasPropertyA) { ... }
```
Now the tricky part: you need to register all test patterns using the
`REGISTER_TYPED_TEST_SUITE_P` macro before you can instantiate them. The first
argument of the macro is the test suite name; the rest are the names of the
tests in this test suite:
```c++
REGISTER_TYPED_TEST_SUITE_P(FooTest,
DoesBlah, HasPropertyA);
```
Finally, you are free to instantiate the pattern with the types you want. If you
put the above code in a header file, you can `#include` it in multiple C++
source files and instantiate it multiple times.
```c++
using MyTypes = ::testing::Types<char, int, unsigned int>;
INSTANTIATE_TYPED_TEST_SUITE_P(My, FooTest, MyTypes);
```
To distinguish different instances of the pattern, the first argument to the
`INSTANTIATE_TYPED_TEST_SUITE_P` macro is a prefix that will be added to the
actual test suite name. Remember to pick unique prefixes for different
instances.
In the special case where the type list contains only one type, you can write
that type directly without `::testing::Types<...>`, like this:
```c++
INSTANTIATE_TYPED_TEST_SUITE_P(My, FooTest, int);
```
You can see [sample6_unittest.cc] for a complete example.
## Testing Private Code
If you change your software's internal implementation, your tests should not
break as long as the change is not observable by users. Therefore, **per the
black-box testing principle, most of the time you should test your code through
its public interfaces.**
**If you still find yourself needing to test internal implementation code,
consider if there's a better design.** The desire to test internal
implementation is often a sign that the class is doing too much. Consider
extracting an implementation class, and testing it. Then use that implementation
class in the original class.
If you absolutely have to test non-public interface code though, you can. There
are two cases to consider:
* Static functions ( *not* the same as static member functions!) or unnamed
namespaces, and
* Private or protected class members
To test them, we use the following special techniques:
* Both static functions and definitions/declarations in an unnamed namespace
are only visible within the same translation unit. To test them, you can
`#include` the entire `.cc` file being tested in your `*_test.cc` file.
(#including `.cc` files is not a good way to reuse code - you should not do
this in production code!)
However, a better approach is to move the private code into the
`foo::internal` namespace, where `foo` is the namespace your project
normally uses, and put the private declarations in a `*-internal.h` file.
Your production `.cc` files and your tests are allowed to include this
internal header, but your clients are not. This way, you can fully test your
internal implementation without leaking it to your clients.
* Private class members are only accessible from within the class or by
friends. To access a class' private members, you can declare your test
fixture as a friend to the class and define accessors in your fixture. Tests
using the fixture can then access the private members of your production
class via the accessors in the fixture. Note that even though your fixture
is a friend to your production class, your tests are not automatically
friends to it, as they are technically defined in sub-classes of the
fixture.
Another way to test private members is to refactor them into an
implementation class, which is then declared in a `*-internal.h` file. Your
clients aren't allowed to include this header but your tests can. Such is
called the
[Pimpl](https://www.gamedev.net/articles/programming/general-and-gameplay-programming/the-c-pimpl-r1794/)
(Private Implementation) idiom.
Or, you can declare an individual test as a friend of your class by adding
this line in the class body:
```c++
FRIEND_TEST(TestSuiteName, TestName);
```
For example,
```c++
// foo.h
class Foo {
...
private:
FRIEND_TEST(FooTest, BarReturnsZeroOnNull);
int Bar(void* x);
};
// foo_test.cc
...
TEST(FooTest, BarReturnsZeroOnNull) {
Foo foo;
EXPECT_EQ(foo.Bar(NULL), 0); // Uses Foo's private member Bar().
}
```
Pay special attention when your class is defined in a namespace. If you want
your test fixtures and tests to be friends of your class, then they must be
defined in the exact same namespace (no anonymous or inline namespaces).
For example, if the code to be tested looks like:
```c++
namespace my_namespace {
class Foo {
friend class FooTest;
FRIEND_TEST(FooTest, Bar);
FRIEND_TEST(FooTest, Baz);
... definition of the class Foo ...
};
} // namespace my_namespace
```
Your test code should be something like:
```c++
namespace my_namespace {
class FooTest : public testing::Test {
protected:
...
};
TEST_F(FooTest, Bar) { ... }
TEST_F(FooTest, Baz) { ... }
} // namespace my_namespace
```
## "Catching" Failures
If you are building a testing utility on top of googletest, you'll want to test
your utility. What framework would you use to test it? googletest, of course.
The challenge is to verify that your testing utility reports failures correctly.
In frameworks that report a failure by throwing an exception, you could catch
the exception and assert on it. But googletest doesn't use exceptions, so how do
we test that a piece of code generates an expected failure?
`"gtest/gtest-spi.h"` contains some constructs to do this. After #including this header,
you can use
```c++
EXPECT_FATAL_FAILURE(statement, substring);
```
to assert that `statement` generates a fatal (e.g. `ASSERT_*`) failure in the
current thread whose message contains the given `substring`, or use
```c++
EXPECT_NONFATAL_FAILURE(statement, substring);
```
if you are expecting a non-fatal (e.g. `EXPECT_*`) failure.
Only failures in the current thread are checked to determine the result of this
type of expectations. If `statement` creates new threads, failures in these
threads are also ignored. If you want to catch failures in other threads as
well, use one of the following macros instead:
```c++
EXPECT_FATAL_FAILURE_ON_ALL_THREADS(statement, substring);
EXPECT_NONFATAL_FAILURE_ON_ALL_THREADS(statement, substring);
```
{: .callout .note}
NOTE: Assertions from multiple threads are currently not supported on Windows.
For technical reasons, there are some caveats:
1. You cannot stream a failure message to either macro.
2. `statement` in `EXPECT_FATAL_FAILURE{_ON_ALL_THREADS}()` cannot reference
local non-static variables or non-static members of `this` object.
3. `statement` in `EXPECT_FATAL_FAILURE{_ON_ALL_THREADS}()` cannot return a
value.
## Registering tests programmatically
The `TEST` macros handle the vast majority of all use cases, but there are few
where runtime registration logic is required. For those cases, the framework
provides the `::testing::RegisterTest` that allows callers to register arbitrary
tests dynamically.
This is an advanced API only to be used when the `TEST` macros are insufficient.
The macros should be preferred when possible, as they avoid most of the
complexity of calling this function.
It provides the following signature:
```c++
template <typename Factory>
TestInfo* RegisterTest(const char* test_suite_name, const char* test_name,
const char* type_param, const char* value_param,
const char* file, int line, Factory factory);
```
The `factory` argument is a factory callable (move-constructible) object or
function pointer that creates a new instance of the Test object. It handles
ownership to the caller. The signature of the callable is `Fixture*()`, where
`Fixture` is the test fixture class for the test. All tests registered with the
same `test_suite_name` must return the same fixture type. This is checked at
runtime.
The framework will infer the fixture class from the factory and will call the
`SetUpTestSuite` and `TearDownTestSuite` for it.
Must be called before `RUN_ALL_TESTS()` is invoked, otherwise behavior is
undefined.
Use case example:
```c++
class MyFixture : public testing::Test {
public:
// All of these optional, just like in regular macro usage.
static void SetUpTestSuite() { ... }
static void TearDownTestSuite() { ... }
void SetUp() override { ... }
void TearDown() override { ... }
};
class MyTest : public MyFixture {
public:
explicit MyTest(int data) : data_(data) {}
void TestBody() override { ... }
private:
int data_;
};
void RegisterMyTests(const std::vector<int>& values) {
for (int v : values) {
testing::RegisterTest(
"MyFixture", ("Test" + std::to_string(v)).c_str(), nullptr,
std::to_string(v).c_str(),
__FILE__, __LINE__,
// Important to use the fixture type as the return type here.
[=]() -> MyFixture* { return new MyTest(v); });
}
}
...
int main(int argc, char** argv) {
std::vector<int> values_to_test = LoadValuesFromConfig();
RegisterMyTests(values_to_test);
...
return RUN_ALL_TESTS();
}
```
## Getting the Current Test's Name
Sometimes a function may need to know the name of the currently running test.
For example, you may be using the `SetUp()` method of your test fixture to set
the golden file name based on which test is running. The
[`TestInfo`](reference/testing.md#TestInfo) class has this information.
To obtain a `TestInfo` object for the currently running test, call
`current_test_info()` on the [`UnitTest`](reference/testing.md#UnitTest)
singleton object:
```c++
// Gets information about the currently running test.
// Do NOT delete the returned object - it's managed by the UnitTest class.
const testing::TestInfo* const test_info =
testing::UnitTest::GetInstance()->current_test_info();
printf("We are in test %s of test suite %s.\n",
test_info->name(),
test_info->test_suite_name());
```
`current_test_info()` returns a null pointer if no test is running. In
particular, you cannot find the test suite name in `SetUpTestSuite()`,
`TearDownTestSuite()` (where you know the test suite name implicitly), or
functions called from them.
## Extending googletest by Handling Test Events
googletest provides an **event listener API** to let you receive notifications
about the progress of a test program and test failures. The events you can
listen to include the start and end of the test program, a test suite, or a test
method, among others. You may use this API to augment or replace the standard
console output, replace the XML output, or provide a completely different form
of output, such as a GUI or a database. You can also use test events as
checkpoints to implement a resource leak checker, for example.
### Defining Event Listeners
To define a event listener, you subclass either
[`testing::TestEventListener`](reference/testing.md#TestEventListener) or
[`testing::EmptyTestEventListener`](reference/testing.md#EmptyTestEventListener)
The former is an (abstract) interface, where *each pure virtual method can be
overridden to handle a test event* (For example, when a test starts, the
`OnTestStart()` method will be called.). The latter provides an empty
implementation of all methods in the interface, such that a subclass only needs
to override the methods it cares about.
When an event is fired, its context is passed to the handler function as an
argument. The following argument types are used:
* UnitTest reflects the state of the entire test program,
* TestSuite has information about a test suite, which can contain one or more
tests,
* TestInfo contains the state of a test, and
* TestPartResult represents the result of a test assertion.
An event handler function can examine the argument it receives to find out
interesting information about the event and the test program's state.
Here's an example:
```c++
class MinimalistPrinter : public testing::EmptyTestEventListener {
// Called before a test starts.
void OnTestStart(const testing::TestInfo& test_info) override {
printf("*** Test %s.%s starting.\n",
test_info.test_suite_name(), test_info.name());
}
// Called after a failed assertion or a SUCCESS().
void OnTestPartResult(const testing::TestPartResult& test_part_result) override {
printf("%s in %s:%d\n%s\n",
test_part_result.failed() ? "*** Failure" : "Success",
test_part_result.file_name(),
test_part_result.line_number(),
test_part_result.summary());
}
// Called after a test ends.
void OnTestEnd(const testing::TestInfo& test_info) override {
printf("*** Test %s.%s ending.\n",
test_info.test_suite_name(), test_info.name());
}
};
```
### Using Event Listeners
To use the event listener you have defined, add an instance of it to the
googletest event listener list (represented by class
[`TestEventListeners`](reference/testing.md#TestEventListeners) - note the "s"
at the end of the name) in your `main()` function, before calling
`RUN_ALL_TESTS()`:
```c++
int main(int argc, char** argv) {
testing::InitGoogleTest(&argc, argv);
// Gets hold of the event listener list.
testing::TestEventListeners& listeners =
testing::UnitTest::GetInstance()->listeners();
// Adds a listener to the end. googletest takes the ownership.
listeners.Append(new MinimalistPrinter);
return RUN_ALL_TESTS();
}
```
There's only one problem: the default test result printer is still in effect, so
its output will mingle with the output from your minimalist printer. To suppress
the default printer, just release it from the event listener list and delete it.
You can do so by adding one line:
```c++
...
delete listeners.Release(listeners.default_result_printer());
listeners.Append(new MinimalistPrinter);
return RUN_ALL_TESTS();
```
Now, sit back and enjoy a completely different output from your tests. For more
details, see [sample9_unittest.cc].
[sample9_unittest.cc]: https://github.com/google/googletest/blob/master/googletest/samples/sample9_unittest.cc "Event listener example"
You may append more than one listener to the list. When an `On*Start()` or
`OnTestPartResult()` event is fired, the listeners will receive it in the order
they appear in the list (since new listeners are added to the end of the list,
the default text printer and the default XML generator will receive the event
first). An `On*End()` event will be received by the listeners in the *reverse*
order. This allows output by listeners added later to be framed by output from
listeners added earlier.
### Generating Failures in Listeners
You may use failure-raising macros (`EXPECT_*()`, `ASSERT_*()`, `FAIL()`, etc)
when processing an event. There are some restrictions:
1. You cannot generate any failure in `OnTestPartResult()` (otherwise it will
cause `OnTestPartResult()` to be called recursively).
2. A listener that handles `OnTestPartResult()` is not allowed to generate any
failure.
When you add listeners to the listener list, you should put listeners that
handle `OnTestPartResult()` *before* listeners that can generate failures. This
ensures that failures generated by the latter are attributed to the right test
by the former.
See [sample10_unittest.cc] for an example of a failure-raising listener.
[sample10_unittest.cc]: https://github.com/google/googletest/blob/master/googletest/samples/sample10_unittest.cc "Failure-raising listener example"
## Running Test Programs: Advanced Options
googletest test programs are ordinary executables. Once built, you can run them
directly and affect their behavior via the following environment variables
and/or command line flags. For the flags to work, your programs must call
`::testing::InitGoogleTest()` before calling `RUN_ALL_TESTS()`.
To see a list of supported flags and their usage, please run your test program
with the `--help` flag. You can also use `-h`, `-?`, or `/?` for short.
If an option is specified both by an environment variable and by a flag, the
latter takes precedence.
### Selecting Tests
#### Listing Test Names
Sometimes it is necessary to list the available tests in a program before
running them so that a filter may be applied if needed. Including the flag
`--gtest_list_tests` overrides all other flags and lists tests in the following
format:
```none
TestSuite1.
TestName1
TestName2
TestSuite2.
TestName
```
None of the tests listed are actually run if the flag is provided. There is no
corresponding environment variable for this flag.
#### Running a Subset of the Tests
By default, a googletest program runs all tests the user has defined. Sometimes,
you want to run only a subset of the tests (e.g. for debugging or quickly
verifying a change). If you set the `GTEST_FILTER` environment variable or the
`--gtest_filter` flag to a filter string, googletest will only run the tests
whose full names (in the form of `TestSuiteName.TestName`) match the filter.
The format of a filter is a '`:`'-separated list of wildcard patterns (called
the *positive patterns*) optionally followed by a '`-`' and another
'`:`'-separated pattern list (called the *negative patterns*). A test matches
the filter if and only if it matches any of the positive patterns but does not
match any of the negative patterns.
A pattern may contain `'*'` (matches any string) or `'?'` (matches any single
character). For convenience, the filter `'*-NegativePatterns'` can be also
written as `'-NegativePatterns'`.
For example:
* `./foo_test` Has no flag, and thus runs all its tests.
* `./foo_test --gtest_filter=*` Also runs everything, due to the single
match-everything `*` value.
* `./foo_test --gtest_filter=FooTest.*` Runs everything in test suite
`FooTest` .
* `./foo_test --gtest_filter=*Null*:*Constructor*` Runs any test whose full
name contains either `"Null"` or `"Constructor"` .
* `./foo_test --gtest_filter=-*DeathTest.*` Runs all non-death tests.
* `./foo_test --gtest_filter=FooTest.*-FooTest.Bar` Runs everything in test
suite `FooTest` except `FooTest.Bar`.
* `./foo_test --gtest_filter=FooTest.*:BarTest.*-FooTest.Bar:BarTest.Foo` Runs
everything in test suite `FooTest` except `FooTest.Bar` and everything in
test suite `BarTest` except `BarTest.Foo`.
#### Stop test execution upon first failure
By default, a googletest program runs all tests the user has defined. In some
cases (e.g. iterative test development & execution) it may be desirable stop
test execution upon first failure (trading improved latency for completeness).
If `GTEST_FAIL_FAST` environment variable or `--gtest_fail_fast` flag is set,
the test runner will stop execution as soon as the first test failure is
found.
#### Temporarily Disabling Tests
If you have a broken test that you cannot fix right away, you can add the
`DISABLED_` prefix to its name. This will exclude it from execution. This is
better than commenting out the code or using `#if 0`, as disabled tests are
still compiled (and thus won't rot).
If you need to disable all tests in a test suite, you can either add `DISABLED_`
to the front of the name of each test, or alternatively add it to the front of
the test suite name.
For example, the following tests won't be run by googletest, even though they
will still be compiled:
```c++
// Tests that Foo does Abc.
TEST(FooTest, DISABLED_DoesAbc) { ... }
class DISABLED_BarTest : public testing::Test { ... };
// Tests that Bar does Xyz.
TEST_F(DISABLED_BarTest, DoesXyz) { ... }
```
{: .callout .note}
NOTE: This feature should only be used for temporary pain-relief. You still have
to fix the disabled tests at a later date. As a reminder, googletest will print
a banner warning you if a test program contains any disabled tests.
{: .callout .tip}
TIP: You can easily count the number of disabled tests you have using
`grep`. This number can be used as a metric for
improving your test quality.
#### Temporarily Enabling Disabled Tests
To include disabled tests in test execution, just invoke the test program with
the `--gtest_also_run_disabled_tests` flag or set the
`GTEST_ALSO_RUN_DISABLED_TESTS` environment variable to a value other than `0`.
You can combine this with the `--gtest_filter` flag to further select which
disabled tests to run.
### Repeating the Tests
Once in a while you'll run into a test whose result is hit-or-miss. Perhaps it
will fail only 1% of the time, making it rather hard to reproduce the bug under
a debugger. This can be a major source of frustration.
The `--gtest_repeat` flag allows you to repeat all (or selected) test methods in
a program many times. Hopefully, a flaky test will eventually fail and give you
a chance to debug. Here's how to use it:
```none
$ foo_test --gtest_repeat=1000
Repeat foo_test 1000 times and don't stop at failures.
$ foo_test --gtest_repeat=-1
A negative count means repeating forever.
$ foo_test --gtest_repeat=1000 --gtest_break_on_failure
Repeat foo_test 1000 times, stopping at the first failure. This
is especially useful when running under a debugger: when the test
fails, it will drop into the debugger and you can then inspect
variables and stacks.
$ foo_test --gtest_repeat=1000 --gtest_filter=FooBar.*
Repeat the tests whose name matches the filter 1000 times.
```
If your test program contains
[global set-up/tear-down](#global-set-up-and-tear-down) code, it will be
repeated in each iteration as well, as the flakiness may be in it. You can also
specify the repeat count by setting the `GTEST_REPEAT` environment variable.
### Shuffling the Tests
You can specify the `--gtest_shuffle` flag (or set the `GTEST_SHUFFLE`
environment variable to `1`) to run the tests in a program in a random order.
This helps to reveal bad dependencies between tests.
By default, googletest uses a random seed calculated from the current time.
Therefore you'll get a different order every time. The console output includes
the random seed value, such that you can reproduce an order-related test failure
later. To specify the random seed explicitly, use the `--gtest_random_seed=SEED`
flag (or set the `GTEST_RANDOM_SEED` environment variable), where `SEED` is an
integer in the range [0, 99999]. The seed value 0 is special: it tells
googletest to do the default behavior of calculating the seed from the current
time.
If you combine this with `--gtest_repeat=N`, googletest will pick a different
random seed and re-shuffle the tests in each iteration.
### Controlling Test Output
#### Colored Terminal Output
googletest can use colors in its terminal output to make it easier to spot the
important information:
<pre>...
<font color="green">[----------]</font> 1 test from FooTest
<font color="green">[ RUN ]</font> FooTest.DoesAbc
<font color="green">[ OK ]</font> FooTest.DoesAbc
<font color="green">[----------]</font> 2 tests from BarTest
<font color="green">[ RUN ]</font> BarTest.HasXyzProperty
<font color="green">[ OK ]</font> BarTest.HasXyzProperty
<font color="green">[ RUN ]</font> BarTest.ReturnsTrueOnSuccess
... some error messages ...
<font color="red">[ FAILED ]</font> BarTest.ReturnsTrueOnSuccess
...
<font color="green">[==========]</font> 30 tests from 14 test suites ran.
<font color="green">[ PASSED ]</font> 28 tests.
<font color="red">[ FAILED ]</font> 2 tests, listed below:
<font color="red">[ FAILED ]</font> BarTest.ReturnsTrueOnSuccess
<font color="red">[ FAILED ]</font> AnotherTest.DoesXyz
2 FAILED TESTS
</pre>
You can set the `GTEST_COLOR` environment variable or the `--gtest_color`
command line flag to `yes`, `no`, or `auto` (the default) to enable colors,
disable colors, or let googletest decide. When the value is `auto`, googletest
will use colors if and only if the output goes to a terminal and (on non-Windows
platforms) the `TERM` environment variable is set to `xterm` or `xterm-color`.
#### Suppressing test passes
By default, googletest prints 1 line of output for each test, indicating if it
passed or failed. To show only test failures, run the test program with
`--gtest_brief=1`, or set the GTEST_BRIEF environment variable to `1`.
#### Suppressing the Elapsed Time
By default, googletest prints the time it takes to run each test. To disable
that, run the test program with the `--gtest_print_time=0` command line flag, or
set the GTEST_PRINT_TIME environment variable to `0`.
#### Suppressing UTF-8 Text Output
In case of assertion failures, googletest prints expected and actual values of
type `string` both as hex-encoded strings as well as in readable UTF-8 text if
they contain valid non-ASCII UTF-8 characters. If you want to suppress the UTF-8
text because, for example, you don't have an UTF-8 compatible output medium, run
the test program with `--gtest_print_utf8=0` or set the `GTEST_PRINT_UTF8`
environment variable to `0`.
#### Generating an XML Report
googletest can emit a detailed XML report to a file in addition to its normal
textual output. The report contains the duration of each test, and thus can help
you identify slow tests.
To generate the XML report, set the `GTEST_OUTPUT` environment variable or the
`--gtest_output` flag to the string `"xml:path_to_output_file"`, which will
create the file at the given location. You can also just use the string `"xml"`,
in which case the output can be found in the `test_detail.xml` file in the
current directory.
If you specify a directory (for example, `"xml:output/directory/"` on Linux or
`"xml:output\directory\"` on Windows), googletest will create the XML file in
that directory, named after the test executable (e.g. `foo_test.xml` for test
program `foo_test` or `foo_test.exe`). If the file already exists (perhaps left
over from a previous run), googletest will pick a different name (e.g.
`foo_test_1.xml`) to avoid overwriting it.
The report is based on the `junitreport` Ant task. Since that format was
originally intended for Java, a little interpretation is required to make it
apply to googletest tests, as shown here:
```xml
<testsuites name="AllTests" ...>
<testsuite name="test_case_name" ...>
<testcase name="test_name" ...>
<failure message="..."/>
<failure message="..."/>
<failure message="..."/>
</testcase>
</testsuite>
</testsuites>
```
* The root `<testsuites>` element corresponds to the entire test program.
* `<testsuite>` elements correspond to googletest test suites.
* `<testcase>` elements correspond to googletest test functions.
For instance, the following program
```c++
TEST(MathTest, Addition) { ... }
TEST(MathTest, Subtraction) { ... }
TEST(LogicTest, NonContradiction) { ... }
```
could generate this report:
```xml
<?xml version="1.0" encoding="UTF-8"?>
<testsuites tests="3" failures="1" errors="0" time="0.035" timestamp="2011-10-31T18:52:42" name="AllTests">
<testsuite name="MathTest" tests="2" failures="1" errors="0" time="0.015">
<testcase name="Addition" status="run" time="0.007" classname="">
<failure message="Value of: add(1, 1)&#x0A; Actual: 3&#x0A;Expected: 2" type="">...</failure>
<failure message="Value of: add(1, -1)&#x0A; Actual: 1&#x0A;Expected: 0" type="">...</failure>
</testcase>
<testcase name="Subtraction" status="run" time="0.005" classname="">
</testcase>
</testsuite>
<testsuite name="LogicTest" tests="1" failures="0" errors="0" time="0.005">
<testcase name="NonContradiction" status="run" time="0.005" classname="">
</testcase>
</testsuite>
</testsuites>
```
Things to note:
* The `tests` attribute of a `<testsuites>` or `<testsuite>` element tells how
many test functions the googletest program or test suite contains, while the
`failures` attribute tells how many of them failed.
* The `time` attribute expresses the duration of the test, test suite, or
entire test program in seconds.
* The `timestamp` attribute records the local date and time of the test
execution.
* Each `<failure>` element corresponds to a single failed googletest
assertion.
#### Generating a JSON Report
googletest can also emit a JSON report as an alternative format to XML. To
generate the JSON report, set the `GTEST_OUTPUT` environment variable or the
`--gtest_output` flag to the string `"json:path_to_output_file"`, which will
create the file at the given location. You can also just use the string
`"json"`, in which case the output can be found in the `test_detail.json` file
in the current directory.
The report format conforms to the following JSON Schema:
```json
{
"$schema": "http://json-schema.org/schema#",
"type": "object",
"definitions": {
"TestCase": {
"type": "object",
"properties": {
"name": { "type": "string" },
"tests": { "type": "integer" },
"failures": { "type": "integer" },
"disabled": { "type": "integer" },
"time": { "type": "string" },
"testsuite": {
"type": "array",
"items": {
"$ref": "#/definitions/TestInfo"
}
}
}
},
"TestInfo": {
"type": "object",
"properties": {
"name": { "type": "string" },
"status": {
"type": "string",
"enum": ["RUN", "NOTRUN"]
},
"time": { "type": "string" },
"classname": { "type": "string" },
"failures": {
"type": "array",
"items": {
"$ref": "#/definitions/Failure"
}
}
}
},
"Failure": {
"type": "object",
"properties": {
"failures": { "type": "string" },
"type": { "type": "string" }
}
}
},
"properties": {
"tests": { "type": "integer" },
"failures": { "type": "integer" },
"disabled": { "type": "integer" },
"errors": { "type": "integer" },
"timestamp": {
"type": "string",
"format": "date-time"
},
"time": { "type": "string" },
"name": { "type": "string" },
"testsuites": {
"type": "array",
"items": {
"$ref": "#/definitions/TestCase"
}
}
}
}
```
The report uses the format that conforms to the following Proto3 using the
[JSON encoding](https://developers.google.com/protocol-buffers/docs/proto3#json):
```proto
syntax = "proto3";
package googletest;
import "google/protobuf/timestamp.proto";
import "google/protobuf/duration.proto";
message UnitTest {
int32 tests = 1;
int32 failures = 2;
int32 disabled = 3;
int32 errors = 4;
google.protobuf.Timestamp timestamp = 5;
google.protobuf.Duration time = 6;
string name = 7;
repeated TestCase testsuites = 8;
}
message TestCase {
string name = 1;
int32 tests = 2;
int32 failures = 3;
int32 disabled = 4;
int32 errors = 5;
google.protobuf.Duration time = 6;
repeated TestInfo testsuite = 7;
}
message TestInfo {
string name = 1;
enum Status {
RUN = 0;
NOTRUN = 1;
}
Status status = 2;
google.protobuf.Duration time = 3;
string classname = 4;
message Failure {
string failures = 1;
string type = 2;
}
repeated Failure failures = 5;
}
```
For instance, the following program
```c++
TEST(MathTest, Addition) { ... }
TEST(MathTest, Subtraction) { ... }
TEST(LogicTest, NonContradiction) { ... }
```
could generate this report:
```json
{
"tests": 3,
"failures": 1,
"errors": 0,
"time": "0.035s",
"timestamp": "2011-10-31T18:52:42Z",
"name": "AllTests",
"testsuites": [
{
"name": "MathTest",
"tests": 2,
"failures": 1,
"errors": 0,
"time": "0.015s",
"testsuite": [
{
"name": "Addition",
"status": "RUN",
"time": "0.007s",
"classname": "",
"failures": [
{
"message": "Value of: add(1, 1)\n Actual: 3\nExpected: 2",
"type": ""
},
{
"message": "Value of: add(1, -1)\n Actual: 1\nExpected: 0",
"type": ""
}
]
},
{
"name": "Subtraction",
"status": "RUN",
"time": "0.005s",
"classname": ""
}
]
},
{
"name": "LogicTest",
"tests": 1,
"failures": 0,
"errors": 0,
"time": "0.005s",
"testsuite": [
{
"name": "NonContradiction",
"status": "RUN",
"time": "0.005s",
"classname": ""
}
]
}
]
}
```
{: .callout .important}
IMPORTANT: The exact format of the JSON document is subject to change.
### Controlling How Failures Are Reported
#### Detecting Test Premature Exit
Google Test implements the _premature-exit-file_ protocol for test runners
to catch any kind of unexpected exits of test programs. Upon start,
Google Test creates the file which will be automatically deleted after
all work has been finished. Then, the test runner can check if this file
exists. In case the file remains undeleted, the inspected test has exited
prematurely.
This feature is enabled only if the `TEST_PREMATURE_EXIT_FILE` environment
variable has been set.
#### Turning Assertion Failures into Break-Points
When running test programs under a debugger, it's very convenient if the
debugger can catch an assertion failure and automatically drop into interactive
mode. googletest's *break-on-failure* mode supports this behavior.
To enable it, set the `GTEST_BREAK_ON_FAILURE` environment variable to a value
other than `0`. Alternatively, you can use the `--gtest_break_on_failure`
command line flag.
#### Disabling Catching Test-Thrown Exceptions
googletest can be used either with or without exceptions enabled. If a test
throws a C++ exception or (on Windows) a structured exception (SEH), by default
googletest catches it, reports it as a test failure, and continues with the next
test method. This maximizes the coverage of a test run. Also, on Windows an
uncaught exception will cause a pop-up window, so catching the exceptions allows
you to run the tests automatically.
When debugging the test failures, however, you may instead want the exceptions
to be handled by the debugger, such that you can examine the call stack when an
exception is thrown. To achieve that, set the `GTEST_CATCH_EXCEPTIONS`
environment variable to `0`, or use the `--gtest_catch_exceptions=0` flag when
running the tests.
### Sanitizer Integration
The
[Undefined Behavior Sanitizer](https://clang.llvm.org/docs/UndefinedBehaviorSanitizer.html),
[Address Sanitizer](https://github.com/google/sanitizers/wiki/AddressSanitizer),
and
[Thread Sanitizer](https://github.com/google/sanitizers/wiki/ThreadSanitizerCppManual)
all provide weak functions that you can override to trigger explicit failures
when they detect sanitizer errors, such as creating a reference from `nullptr`.
To override these functions, place definitions for them in a source file that
you compile as part of your main binary:
```
extern "C" {
void __ubsan_on_report() {
FAIL() << "Encountered an undefined behavior sanitizer error";
}
void __asan_on_error() {
FAIL() << "Encountered an address sanitizer error";
}
void __tsan_on_report() {
FAIL() << "Encountered a thread sanitizer error";
}
} // extern "C"
```
After compiling your project with one of the sanitizers enabled, if a particular
test triggers a sanitizer error, googletest will report that it failed.